3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Di... 3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Di...

Out of stock

Printers Accessories

FLSUN

$92.00 $51.00
-
+
$51.00
1.Bed Leveling

Auto Leveling
After the machine assembles with a bed leveling controller, then run leveling on TFT interface.
#The command of auto leveling (G29 is available for Marlin.
While G32 is for Repetier and Smoothieware)
>cfg_auto_leveling_cmd:G28;G29;

Manual Leveling
Manual leveling is good for MB,i3 etc machines. It is available to set 3,4,5 point .
#The point number of manual leveling:(3,4,5 point available)
>cfg_point_number:4



2.Filament Replace
It is easy to replace the filament when it runs out.
You are able to set temperature and the speed of filament in-out on config.
As following:
#the speed of filament replacing(mm/min)
>cfg_filament_change_speed:1200

#the length of filament replacing(mm)
>cfg_filament_change_step:5

#the min temperature of filament replacing
>cfg_filament_limit_temperature:175



3.Print from Breakpoint
TFT has a one of the excellent features is able to print from Breakpoint.
Below is the way to do it.
Firstly, set target temperature of extruder and heated bed, and then preheat.
Secondly, when preheat ready, go home .(Notice: if power off happens during operating printing from breakpoint, please must home .)
Thirdly, move extruder to the breakpoint which is available to set allowable error.
#Breakpoints continued playing Z-axis error setting
>cfg_breakpoint_z_error:0.2
Fourth, click set, and then click Continue(Means Print from Breakpoint).
After that, choose the file you want.
(If you pause the printing, and turn the printer off,
then it will resume to print from the pause point after power on.)



4.Filament Outage Detecting
Connect detecting switch to PB1 of TFT.
Set configuration to trigger low level or high level available.
#the level signal of outage detection module PB1(low level:0; high level:1)
>cfg_PB0_PB1_Level:1



5. Auto off after Print Finishes
Enable this function on config,and take concerted with PWC switch.
#whether set machine auto-off after print finishes(auto-off:1; NO:0)
>cfg_print_finish_close_Machine:0
Materials: Plastics
Suitable for: Mainboard Control
Type: DIY Accessories
Package size: 15.00 x 11.00 x 5.00 cm / 5.91 x 4.33 x 1.97 inches
Package weight: 0.132 kg
Package Contents: 1 x3d touch screen printer

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display


1.Bed Leveling

Auto Leveling
After the machine assembles with a bed leveling controller, then run leveling on TFT interface.
#The command of auto leveling (G29 is available for Marlin.
While G32 is for Repetier and Smoothieware)
>cfg_auto_leveling_cmd:G28;G29;

Manual Leveling
Manual leveling is good for MB,i3 etc machines. It is available to set 3,4,5 point .
#The point number of manual leveling:(3,4,5 point available)
>cfg_point_number:4



2.Filament Replace
It is easy to replace the filament when it runs out.
You are able to set temperature and the speed of filament in-out on config.
As following:
#the speed of filament replacing(mm/min)
>cfg_filament_change_speed:1200

#the length of filament replacing(mm)
>cfg_filament_change_step:5

#the min temperature of filament replacing
>cfg_filament_limit_temperature:175



3.Print from Breakpoint
TFT has a one of the excellent features is able to print from Breakpoint.
Below is the way to do it.
Firstly, set target temperature of extruder and heated bed, and then preheat.
Secondly, when preheat ready, go home .(Notice: if power off happens during operating printing from breakpoint, please must home .)
Thirdly, move extruder to the breakpoint which is available to set allowable error.
#Breakpoints continued playing Z-axis error setting
>cfg_breakpoint_z_error:0.2
Fourth, click set, and then click Continue(Means Print from Breakpoint).
After that, choose the file you want.
(If you pause the printing, and turn the printer off,
then it will resume to print from the pause point after power on.)



4.Filament Outage Detecting
Connect detecting switch to PB1 of TFT.
Set configuration to trigger low level or high level available.
#the level signal of outage detection module PB1(low level:0; high level:1)
>cfg_PB0_PB1_Level:1



5. Auto off after Print Finishes
Enable this function on config,and take concerted with PWC switch.
#whether set machine auto-off after print finishes(auto-off:1; NO:0)
>cfg_print_finish_close_Machine:0
Materials: Plastics
Suitable for: Mainboard Control
Type: DIY Accessories
Package size: 15.00 x 11.00 x 5.00 cm / 5.91 x 4.33 x 1.97 inches
Package weight: 0.132 kg
Package Contents: 1 x3d touch screen printer

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display

3D Printer Touch LCD Screen MKS_GEN Controller Full Color 3.2 Inch MSK TFT32 Touch Screen LCD Display


Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Size Chart

Recently Viewed Products Recently Viewed Products